Free calculator
Deposit and milestone calculator
Enter a project total, a deposit percentage and milestone shares to get a payment schedule whose rounded amounts add up exactly to the total. Shares can be a percentage of the balance after the deposit or of the whole project, and the schedule shows which payment absorbed any rounding difference.
The example project, milestone names and amounts are illustrative. The schedule is a planning aid: it does not create an invoice or request a payment.
Project and deposit
The figures and milestone names filled in are an example (a brand identity project). Replace them with your own.
The fee your agreement states, before or after tax as it is written there.
Sets how payments are rounded, for example to the cent for USD or to whole yen for JPY. No conversion is applied.
A percentage of the project total. Enter 0 for no deposit.
Decides which payment absorbs a difference of a cent or so, so the payments add up to the total.
Milestones
Start from a common split. A preset replaces the deposit and milestone rows; the total, currency and rounding rule stay as they are.
The milestone shares add up to 100% of the balance.
Payment schedule
Deposit $2,437.50, then 3 milestone payments covering the $7,312.50 balance. The payments add up to exactly $9,750.00.
- Project total
- $9,750.00
- Deposit
- $2,437.50
- Balance after the deposit
- $7,312.50
| Payment | Due | Before rounding (USD) | Amount |
|---|---|---|---|
| Deposit25% of total | Not set | 2,437.50 | $2,437.50 |
| Concept presentation40% of balance, 30% of total | Not set | 2,925.00 | $2,925.00 |
| Final artwork35% of balance, 26.25% of total | Not set | 2,559.375 | $2,559.38 |
| Brand guidelines handover25% of balance, 18.75% of total | Not set | 1,828.125 | $1,828.12−$0.01 rounding |
| Total | 9,750.00 | $9,750.00 |
Rounded one by one, the payments would add up to $9,750.01, which is $0.01 more than the total. To close the gap, every payment is rounded down to the nearest $0.01, then what is left over goes out $0.01 at a time to the payments with the largest fractions dropped (the earlier payment wins a tie). Brand guidelines handover is $1,828.12 instead of $1,828.13.
How the deposit and milestone amounts are calculated
The calculator works from the project total T, the deposit percentage d and a share s for each milestone. The deposit is always a percentage of the total: D = T × d ÷ 100.
The milestones are calculated on one of two bases:
- Share of the balance after the deposit (the default). The deposit comes off first and each milestone is a share of what is left: B = T − D and M = B × s ÷ 100. The milestone shares must add up to 100%.
- Share of the project total. Every payment, the deposit included, is a percentage of T: M = T × s ÷ 100. The deposit and the milestone shares together must add up to 100%.
Each amount is calculated exactly first and rounded only at the end, to the currency's smallest unit: two decimal places for USD, EUR or GBP, none for JPY and three for KWD, BHD or OMR. The precision comes from the ISO 4217 currency data in your browser.
Rounding each payment on its own can leave the schedule a cent or two away from the total. The rounding rule decides which payment closes that gap:
- Spread the difference across payments (the default): every payment is rounded down, then the leftover cents (or the currency's smallest unit) go one at a time to the payments that lost the largest fraction, and a tie goes to the earlier payment. Each payment stays within one cent of its exact value.
- Add the difference to the final payment: the other payments are rounded normally (half a cent rounds up) and the final payment is the total minus the rest.
- Add the difference to the first payment: the same, with the first payment (the deposit, when there is one) taking the difference.
Under every rule the deposit and milestones add up to T exactly, and the schedule names each payment that differs from its own rounded value.
Worked example: a USD 9,750 brand identity project
The calculator opens with this example, and the project and milestone names are made up. An example studio quotes USD 9,750.00 for a brand identity, asks for a 25% deposit and splits the balance into three milestones: 40% at the concept presentation, 35% for final artwork and 25% at the brand guidelines handover.
- Deposit: 9,750.00 × 25 ÷ 100 = 2,437.50.
- Balance after the deposit: 9,750.00 − 2,437.50 = 7,312.50.
- Concept presentation: 7,312.50 × 40 ÷ 100 = 2,925.00.
- Final artwork: 7,312.50 × 35 ÷ 100 = 2,559.375.
- Brand guidelines handover: 7,312.50 × 25 ÷ 100 = 1,828.125.
Two payments end in half a cent. Rounded one by one they would be 2,559.38 and 1,828.13, and the schedule would come to 9,750.01, one cent more than the quote. Under the default rule both are first rounded down, to 2,559.37 and 1,828.12, which leaves one cent unassigned. Both dropped the same half cent, so the tie goes to the earlier payment and Final artwork becomes 2,559.38.
| Payment | Share | Before rounding (USD) | Amount (USD) |
|---|---|---|---|
| Deposit | 25% of total | 2,437.50 | 2,437.50 |
| Concept presentation | 40% of balance, 30% of total | 2,925.00 | 2,925.00 |
| Final artwork | 35% of balance, 26.25% of total | 2,559.375 | 2,559.38 |
| Brand guidelines handover | 25% of balance, 18.75% of total | 1,828.125 | 1,828.12 |
| Total | 100% of total | 9,750.00 | 9,750.00 |
The four payments add up to exactly USD 9,750.00. Choosing “Add the difference to the final payment” gives the same schedule here. Choosing “Add the difference to the first payment” instead makes the deposit 2,437.49 and the brand guidelines handover 1,828.13.
Deposit billing and milestone billing compared
A deposit is paid before work starts, usually when the agreement is signed. It confirms the booking, covers early costs such as materials, travel or a reserved shoot date, and means both sides have committed before anything is delivered. On a short project it is often paired with one balance payment on completion, which is the 50/50 preset.
Milestone billing ties each later payment to a defined point in the project: a concept presentation, a first draft, a shoot day or a launch. The client pays as work is delivered, so the business is not carrying weeks of unbilled work. The two are often combined, as in the example above, with a deposit up front and milestone payments for the balance.
Photographers and some studios call the booking payment a retainer. That is a different arrangement from a monthly retainer for ongoing work, which the retainer billing planner covers.
Shares of the balance match agreements written as “a 30% deposit, then the balance in three stages”. Shares of the total match agreements that list every payment as a percentage of the fee, such as 30/40/30. Use the basis your agreement is written in, so the percentages in the agreement and on each invoice are the same numbers.
What to put in the agreement about deposits and milestones
Write the schedule into the proposal or agreement before the first invoice goes out. These are the points to settle with the client:
- The project total and currency, and whether the amounts include tax.
- The deposit: its amount and percentage, when it is due, and whether work starts only once it is paid.
- Whether the deposit is refundable, and in which circumstances. Rules on cancellations and deposits differ by country and by the kind of client, so have this clause reviewed if you are unsure.
- Each milestone: what has to be delivered or approved before it is invoiced, and how approval works, for example a set number of days to review.
- Payment terms for each invoice, such as due within 14 days of the invoice date.
- What happens to the remaining milestones if the scope changes or the project is paused.
- The exact amount of each payment. Listing the rounded amounts from this calculator settles any question about rounding.
The statement of work template has a timeline and milestones section with an amount or percentage for each milestone, and acceptance criteria to tie each payment to.
Choices to make before you use the schedule
- Deposit size. The calculator does not suggest one, and the 25% in the example is an example, not a recommendation.
- Share basis: a percentage of the balance after the deposit or of the project total. Switching the basis keeps the numbers you typed and does not convert them, so check the shares line after switching.
- Rounding rule: which payment absorbs a difference of a cent or so. It only matters when the amounts do not divide evenly.
- Due dates or triggers. Dates are optional. A milestone that depends on approval is better described by its trigger, which you can put in its name.
- Currency. It sets the rounding precision and nothing else; there is no conversion, and every amount is in the currency you pick.
Assumptions and limitations
- Amounts are used as entered. No tax, discount, late fee or payment processing fee is added, so enter the total your agreement states.
- Every milestone is a percentage, above 0% and up to 100%. Fixed amounts are not supported here, and the calculator takes up to 50 milestones.
- Nothing you type leaves your browser. If analytics are on, the page records that the calculator was used, copied or printed, with the currency code. Amounts, names and dates are never sent.
- Invoices can be issued in USD, EUR, GBP, CAD, AUD, AED, SGD or INR. Listing a currency in this calculator does not mean Hanko invoices or accepts payments in it.
- The schedule is a planning aid. It does not create an invoice, send anything to a client or request a payment.
Billing a deposit and milestone schedule in Hanko
You can send one invoice per payment as it falls due: open the agency invoice template, add the payment as a line item (for example “Deposit, 25% of the brand identity project”) and send it.
If the client has not agreed the work yet, the schedule can go into a Hanko proposal instead. A proposal's payment schedule takes each payment as a percentage or a fixed amount, and the payments have to add up to the proposal total unless you allow a flexible total. When the client accepts the proposal, Hanko creates the invoice for each payment that is set to be created automatically. Entering the rounded amounts from this calculator as fixed amounts keeps the schedule equal to the proposal total.
Related tools, templates and guides
Tools
- Hourly to project price calculatorTurn estimated hours, an hourly rate, contingency and expenses into a fixed project price with milestone options.
- Invoice generatorBuild an invoice with line items, tax and discount assumptions and a due date, then print it or save it as a PDF.
- Retainer billing plannerLay out a monthly retainer's billing dates, included capacity, overage charges and rollover rule as invoice line items.
Templates
- Agency Invoice templateA monthly retainer, a project milestone and approved extra hours on one invoice, with the payment schedule and currency terms the client checks against your agreement.
- Software Development Invoice templateSprint hours by work package against a signed statement of work, with approved change orders on their own line and an option to bill fixed-price milestones instead.
- Statement of Work templateScope and exclusions, deliverables with acceptance criteria, client dependencies, milestones, a payment schedule and change control for one project, written to sit under a master agreement.
Guides
- Invoicing software built for client workBill line items, taxes and discounts on a hosted pay page your client can pay from directly, without a separate payment link.
- Proposal software that becomes the invoiceSend a branded proposal, get it approved, and carry the same client record straight into the agreement and the first invoice.
- How to send a proposal and get paidGo from a branded proposal to a signed agreement to a paid invoice without switching tools.
- Invoicing for Web Development AgenciesPhase milestones through launch, then a maintenance retainer — billed to match the project, not a single flat invoice.
Invoice the deposit or a milestone in Hanko
Sign up or sign in and Hanko opens the Agency Invoice template in its invoice editor (a new account sets up its workspace first). The schedule from this page is not carried over, so add the payment you are billing as a line item and check the amount before you send it.