Skip to content

Free calculator

Hourly rate to project price calculator

Enter the hours you expect each phase of a project to take and your hourly rate, and the calculator adds contingency and expenses to give a fixed price you can quote, with a price range and milestone payments that add up to the total. It also works backwards from a fixed price to the hourly rate that price pays.

The calculator opens with example figures you can change. The result is your own price for a client, not a Hanko fee or plan price, and nothing on this page sends a proposal or an invoice.

Hours, rate and assumptions

The figures filled in below are an example. Replace them with your own estimate.

What do you want to work out?

Sets the formatting and rounding. Listing a currency does not mean Hanko supports payments in it.

Your rate for this client, before any tax.

Phases and estimated hours

A blank hours field counts as zero. Up to 50 phases.

Added to the labor subtotal for work you expect but can't list yet.

Taken off the fees after contingency. Expenses are not discounted.

Travel, licences or other costs you pass on at cost, with no contingency or discount.

How far your hours could be off either way. Sets the low and high prices.

How the price is divided into milestone payments.

Keeps expenses out of the milestone split and lists them on their own line.

Project estimate

Project price $7,692.00 for 56 hours at $120.00 an hour, including 10% contingency and $300.00 of expenses. If the hours come in 15% lower or higher, the price would be $6,583.20 to $8,800.80.

Project priceFees of $7,392.00 plus $300.00 of expenses.
$7,692.00
Price rangeIf the hours come in 15% under or over the estimate.
$6,583.20 to $8,800.80
Effective hourly rateFees ÷ 56 hours. If the work takes 15% longer at this price: $114.78 an hour.
$132.00
Estimate breakdown
ItemHoursAmount
Discovery and interviews10$1,200.00
Research and analysis24$2,880.00
Recommendations report16$1,920.00
Presentation and follow-up6$720.00
Labor subtotal56$6,720.00
Contingency (10%)$672.00
Fees$7,392.00
Pass-through expenses$300.00
Project price$7,692.00
Payment schedule (30 / 40 / 30)
PaymentShareAmount
Deposit at the start30%$2,307.60
Midpoint milestone40%$3,076.80
Final payment on delivery30%$2,307.60
Total$7,692.00

Each line is rounded once to the currency's smallest unit, and each subtotal adds the rounded lines above it.

This is your own estimate of what to charge a client. It is not a Hanko price or quote, and tax is not included.

How the project price is calculated

The estimate is built line by line, the way a quote is laid out. Each phase is priced at its hours times your hourly rate. Contingency is a percentage added to that labor subtotal for work you expect but can't yet itemize, and an optional discount comes off the fees after contingency. Pass-through expenses are added last, at the amount you enter, with no contingency or discount applied to them.

  • Phase fee = hours × hourly rate
  • Labor subtotal (L) = sum of the phase fees
  • Contingency (C) = L × contingency %
  • Discount (D) = (L + C) × discount %
  • Fees (F) = L + C − D
  • Project price (P) = F + pass-through expenses (E)
  • Effective hourly rate = F ÷ total hours

Each line is rounded once to the smallest unit of the currency (cents for US dollars, whole yen for Japanese yen), with halves rounded away from zero. Every subtotal is the sum of the rounded lines above it, so the breakdown adds up exactly as shown. The rate and expenses accept as many decimal places as the currency has, and hours and percentages accept two.

The estimate uncertainty sets the range. If your hours could be u% out in either direction, the low price is F × (100% − u) + E and the high price is F × (100% + u) + E. Expenses stay fixed because they don't depend on how long the work takes. Under a fixed price the extra hours are unpaid, so the calculator also shows what the price would pay per hour if the work ran u% over.

Milestone payments divide the project price by the shares you pick: 50/50, 30/40/30, four equal payments, or one payment per phase in proportion to each phase's fee. Each payment is rounded down to the smallest unit and any leftover units go to the payments with the largest remainders, so the payments always add up to the price. If you bill expenses separately at cost, the split covers the fees only and the expenses appear on their own line.

Worked example: a 56-hour consulting project at $120.00 an hour

Example only. These are the figures the calculator opens with: a consultant pricing a four-phase advisory project at $120.00 an hour, with 10% contingency, $300.00 of travel expenses, no discount and a 15% estimate uncertainty.

Example estimate breakdown
ItemHoursAmount
Discovery and interviews10$1,200.00
Research and analysis24$2,880.00
Recommendations report16$1,920.00
Presentation and follow-up6$720.00
Labor subtotal56$6,720.00
Contingency (10%)$672.00
Fees$7,392.00
Pass-through expenses$300.00
Project price$7,692.00
  1. Labor: 56 hours across four phases at $120.00 comes to $6,720.00.
  2. Contingency: 10% of $6,720.00 is $672.00, so the fees are $7,392.00.
  3. Adding $300.00 of expenses gives a project price of $7,692.00.
  4. Range: $7,392.00 × 85% + $300.00 = $6,583.20, and $7,392.00 × 115% + $300.00 = $8,800.80.
  5. Effective rate: $7,392.00 ÷ 56 hours = $132.00 an hour. If the work took 15% longer (64.4 hours) at the same price, it would pay $114.78 an hour.
  6. A 30 / 40 / 30 schedule splits $7,692.00 into $2,307.60 at the start, $3,076.80 at the midpoint and $2,307.60 on delivery.

Working back from a fixed price to an hourly rate

Switch the calculator to its second mode when a client has named a budget or you have already agreed a fixed price. It takes out any expenses included in the price and divides what is left by the hours you expect to spend.

  • Effective hourly rate = (fixed price − expenses) ÷ hours
  • Rate if the work runs long = (fixed price − expenses) ÷ (hours × (100% + u))

Example only: a fixed price of $7,692.00 that includes $300.00 of expenses leaves $7,392.00 for 56 hours of work, which is $132.00 an hour. With a 15% uncertainty the rate would be $114.78 if the work takes 64.4 hours and $155.29 if it takes 47.6. The example uses the same project as the one above, so the 10% contingency shows up as the gap between the $120.00 rate and the $132.00 effective rate.

Assumptions and limits of the estimate

  • The figures the calculator opens with are an example. The rate, hours, contingency, expenses and uncertainty are assumptions for you to replace with your own.
  • Every phase uses the same hourly rate. If different people or tasks bill at different rates, use a blended rate or run the calculator once for each rate.
  • The range treats hours as the only uncertain input. Scope changes and extra revision rounds are not modelled.
  • Tax is not included. Whether VAT, GST or sales tax applies depends on where you and your client are, and the calculator does not work that out.
  • Payment processing and currency conversion costs are not deducted. To estimate those for an overseas client, use the international invoice fee estimator.
  • Choosing a currency only changes the formatting and rounding. It does not mean Hanko can invoice or take payment in that currency.
  • The calculator holds up to 50 phases, and the uncertainty can be set from 0 to 90%.
  • The hours, rates, amounts and phase names you enter stay in your browser. They are not sent to Hanko or added to the page address.

Choices to make before you quote a fixed price

  • How much contingency to add. A well-defined project for a client you already know may need little; a first engagement with an open brief may need more. Decide whether the proposal names the contingency or folds it into the phase prices.
  • Whether expenses sit inside the fixed price or are billed separately at cost. The consulting proposal template bills travel separately at cost, for example. Tick “Bill expenses separately at cost” to keep them out of the milestone split.
  • Whether to quote one price or a range. A range tells the client the scope is still open, so say what would move the price toward either end.
  • When each payment falls due. The preset splits suggest a deposit at the start and a final payment on delivery; tie each payment to something the client can check, such as an approved draft or a finished phase. To set your own percentages and due dates, use the deposit and milestone calculator.
  • Whether to show the hours. Some clients want to see the hours behind a fixed price, while others only need the phases and the total.
  • Whether a discount applies to the fees only, as it does here, or to the whole price.

Turn the estimate into a proposal in Hanko

Sign up or sign in and Hanko opens the Consulting Proposal template in its proposal editor (a new account sets up its workspace first). Nothing from this calculator is carried over. Copy the estimate before you leave, add the phases, price and payment split to the proposal's brief, and check every figure before you send it.